Boeing B777 - Communications

How can the flight crew make a PA announcement to all areas of the cabin?

Push the PA transmitter select switch on the audio control panel and key any MIC switch.

All statements are correct.

Using the flight deck handset, enter the appropriate dial code from the handset directory and then push the handset PA Push To Talk switch.

Push The CAB transmitter select switch on the audio control panel and then enter the appropriate dial code using the CDU keypad, then key any MIC switch.

Correct! Wrong!

How can the crew cancel a displayed company or ATC uplink message?

Push the CANC/RCL switch on the display select panel.

Push the CANC switch on the glareshield or select the CANCEL command key on the MFD COMM page.

Push the CANC switch on the glareshield.

Select the CANCEL command key on the MFD COMM page.

Correct! Wrong!

Which of the following data values does not provide crew feedback, by turning green, when you comply with an ATC uplink message?

MCP heading.

VOR frequency.

Barometer setting.

VHF frequency.

Correct! Wrong!

What does the COMM communication EICAS alert message indicate when accompanied by a high low chime?

A medium priority uplink has been received and may be reviewed on the communication display.

A VHF or HF selective call has been received and is waiting to be answered.

A low priority uplink has been received and may be reviewed on the communication display.

ACARS has failed.

Correct! Wrong!

Which statement about radio tuning is correct?

HF L can only be tuned by the left radio tuning panel.

The offside tuning light will only appear on the active radio tuning panel.

Any VHF radio can be controlled by any radio tuning panel.

The centre radio tuning panel can only be used to tune an HF radio if either the left or right panel fails.

Correct! Wrong!

When an HF transmitter is keyed after a frequency change the antenna tunes. While the antenna is being tuned, a tone can be heard through the audio system. How much time must be allowed for the antenna to tune?

Tuning takes a maximum of 10 seconds.

Tuning takes a maximum of 15 seconds.

Tuning takes a maximum of 5 seconds.

Tuning takes a maximum of 20 seconds.

Correct! Wrong!

What does illumination of the offside tuning light mean?

The microphone is keyed and transmitting on the selected frequency.

One of the other radio tuning panels is tuning a radio normally tuned by this panel.

You have a call from company.

The selected VHF radio is inoperative.

Correct! Wrong!

The left radio tuning panel is normally associated with VHF L and HF L. The right radio tuning panel is normally associated with VHF R and HF R. The center radio tuning panel is normally associated with VHF C.

What is necessary to converse with the mechanic servicing the engine at the engine nacelle?

You cannot speak with any of the ground crew except at the nose wheel well.

Position the OBS AUDIO selector to CAPT.

Position the SERV INTPH switch to ON.

Use the CDU and line select SERVICE INTERPHONE.

Correct! Wrong!

What is indicated by a flight deck printer PAPER light?

The flight deck printer has failed.

The flight deck printer is turned off.

The flight deck printer is out of paper or the paper is jammed.

The flight deck printer ınk is low.

Correct! Wrong!

HF L and HF R can be configured for data or voice communication. Both can be used together in the data mode.

True.

False.

Correct! Wrong!

Only one HF radio can operate in the data mode at a time.

A high-low chime sounds and a COMM communications alert message appears on EICAS. What action should you take?

Push the COMM switch on the display select panel and view the uplinked message in the CDU scratchpad.

Push the FMC COMM function key on the CDU and view the uplinked message.

Push the COMM switch on the display select panel and view the uplinked message on the MFD.

Push the transmitter select switch with the illuminated CALL light and respond to the call.

Correct! Wrong!

Both HF radios use a common antenna.

False.

True.

Correct! Wrong!

When either HF radio is transmitting, the antenna is disconnected from the other HF radio, and it cannot be used to transmit or receive. However, both HF radios can receive simultaneously if neither is being used for transmitting.

What does the EICAS message RADIO TRANSMIT indicate?

A VHF or HF radio transmitter is keyed for 30 seconds or more.

An incoming HF call requires a response.

Radio transmission is disabled during fuelling.

A radio tuning panel is unserviceable.

Correct! Wrong!

On the ground with both engines shut down, any VHF radio that transmits for more than ____ seconds is automatically disable and dashes appear in the tuning panel frequency window for that radio.

Correct! Wrong!

Which statement about the VHF radio is true?

The DATA mode can only be selected or deselected on the MFD COMM display.

VHF C and VHF R can operate in the DATA mode at the same time.

Only VHF C can be configured for data communication.

VHF L is configured for voice communication only.

Correct! Wrong!

What does the SELCAL communication EICAS alert message indicate?

An uplink has been received.

The selective calling system has failed.

A VHF or HF selective call has been received and is waiting to be answered.

A cabin attendant is calling the flight deck.

Correct! Wrong!

Quiz

Boeing B777 - Communications

How can the flight crew make a PA announcement to all areas of the cabin?

How can the crew cancel a displayed company or ATC uplink message?

Which of the following data values does not provide crew feedback, by turning green, when you comply with an ATC uplink message?

What does the COMM communication EICAS alert message indicate when accompanied by a high low chime?

Which statement about radio tuning is correct?

When an HF transmitter is keyed after a frequency change the antenna tunes. While the antenna is being tuned, a tone can be heard through the audio system. How much time must be allowed for the antenna to tune?

What does illumination of the offside tuning light mean?

What is necessary to converse with the mechanic servicing the engine at the engine nacelle?

What is indicated by a flight deck printer PAPER light?

HF L and HF R can be configured for data or voice communication. Both can be used together in the data mode.

A high-low chime sounds and a COMM communications alert message appears on EICAS. What action should you take?

Both HF radios use a common antenna.

What does the EICAS message RADIO TRANSMIT indicate?

On the ground with both engines shut down, any VHF radio that transmits for more than ____ seconds is automatically disable and dashes appear in the tuning panel frequency window for that radio.

Which statement about the VHF radio is true?

What does the SELCAL communication EICAS alert message indicate?