There have been a number of accidents related to take-off in conditions in which snow and/or other forms of freezing precipitation were falling while the aircraft was on the ground preparing for departure. While there is no doubt that air crew have a clear understanding of the legal and airline requirement for "clean" aircraft prior…… Continue Reading →
Carbon brakes are now standard equipment.The use of these brakes provides a substantial reduction in airplane operating empty weight, but in-service experience has generally shown lower brake life than originally expected. Analysis has revealed a difference between the wear characteristics of carbon versus steel brakes. It is believed that improvements in carbon brake life can…… Continue Reading →
Taxi incidents are usually perceived to be less dangerous than incidents in flight,but they may cost a lot of money! This Airbus document reviews some safety precautions specific to Airbus aircraft, pushback and taxi techniques (One-Engine Taxi – A340 Two Engines), powerpush, taxi with Deflated Tires, etc…. Continue Reading →
Airframe manufacturers, airlines,pilot groups, and government andregulatoryagencies, have developed this training resource dedicated to reducing the number of rejected takeoff (RTO) accidents…. Continue Reading →
On February 8th, 2002, The National Transportation safety Board (NTSB) in cooperation with the French "Bureau Enquetes Accidents" (BEA) issued recommendations that aircraft manufacturers re-emphazise the structural certification requirements for the rudder and vertical stabilizer, showing how some maneuvers can result in exceeding limits and even load to structural failure. The purpose of this Airbus…… Continue Reading →
The U.S. Federal Aviation Regulations and the European Joint Aviation Requirements redefined V1 as the maximum airspeed at which a flight crew must take the first action to safely reject a takeoff. Other revisions change the method of compensating for the time required by pilots to take action to reject a takeoff; require accelerate-stop data…… Continue Reading →
As the computer technology of aircraft navigation systems became more and more sophisticated, aircraft and avionics manufacturers attempt to exploit this computer capability in aircraft operations. One of the most profound capabilities being exploited recently is the aircraft’s capability of navigating vertically on an instrument approach without reference to an external electronic guidance signal such…… Continue Reading →