The hydraulic fluid can be transferred from one system to another.
The ENG PUMP FAULT light goes out when the crew selects the pump OFF, except during:
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-Hydraulics-ENG1-fault.jpg)
The light will stay on as long as the overheat exists.
The GREEN and YELLOW hydraulic systems have a fire shutoff valve in their line, upstream of the engine-driven pump. The flight crew can close these fire shutoff valves by:
Normally, HP bleed air from engine 1 pressurizes the hydraulic reservoirs automatically. If the bleed air pressure is too low or too high, the system takes bleed air pressure from the crossbleed duct.
Only when the bleed air pressure is too low, the system takes bleed air pressure from the crossbleed duct. The systems maintain a high enough pressure to prevent their pumps from cavitating.
All three hydraulic systems maintain a high pressure at their reservoirs in order to prevent their pumps from cavitation.
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-Hydraulic-summary.jpg)
The PTU (Power Transfer Unit) comes into action automatically when the differential pressure between the GREEN and the YELLOW systems is greater than:
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-PTU.jpg)
In order to pressurize the GREEN hydraulic system when both engines are NOT running.
An electric pump can pressurize the YELLOW system, which allows YELLOW hydraulics to be used on the ground when the engines are stooped. The PTU (Power Transfer Unit) comes into action when the differential pressure between the GREEN and the YELLOW systems is greather than 500 psi. The PTU therefore allows the green system to be pressurized on the ground when the engines are stopped.
In case of a BLUE hydraulic reservoir overheat, the FAULT light on the overhead panel stays ON:
The purpose of the accumulators in each hydraulic system is to:
The PTU is automatically inhibited:
The PTU is automatically inhibited during the first engine start and automatically tested during the second engine start.
Advertisement
When the guarded pushbutton "RAT MAN ON" is pressed:
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-Hydraulics-RAT-button.jpg)
During normal operations, hydraulic power is provided by:
When the YELLOW electric pump is automatically activated, it inhibits the operation of the other YELLOW system functions except:
Normally, all three hydraulic reservoirs are automatically pressurized by:
On the ECAM HYD page, the hydraulic quantity indicator becomes amber when:
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-Hydraulic-EICAM.jpg)
The YELLOW electric pump comes ON automatically when:
The PTU FAULT light comes ON and a caution appears on the ECAM if:
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-Hydraulics.jpg)
The YELLOW hydraulic system has _____ pumps to provide pressure (not counting the PTU - Power Transfer Unit)
A pump driven by engine 2 pressurizes the YELLOW system. An electric pump ca also pressurize the YELLOW system, which allows YELLOW hydraulics to be used on the ground when the engines are stopped. Flight crew can also use a hand pump to pressurizethe YELLOW system in order to operate the cargo doors when no electrical power is available.
The ENG 1 PUMP FAULT light is inhibited on the ground when the engine is stopped, if it is triggered due to low pump pressure.
After a HYD G RSVR OVHT ECAM caution, is it possible to recover the GREEN hydraulic system?
Advertisement
Each of the green and yellow systems has a fire shutoff valve in its line upstream of its engine-driven pump. The flight crew can close it by pushing the ENG 1(2) FIRE pushbutton.
An accumulator in each system helps to maintain a constant pressure by covering transient demands during normal operation.
During flight, if the BLUE electric pump fails, the BLUE hydraulic system:
An electric pump pressurizes the blue system. A pump driven by a ram air turbine (RAT) pressurizes this system in an emergency.
The RAT (Ram Air Turbine) pressurizes the BLUE hydraulic system to approximately:
Normal system pressure is 3000 psi (2500 psi when powered by the RAT).
In flight, the BLUE hydraulic system is pressurized by:
Each of the ____ and ____ hydraulic systems has a fire shutoff valve in its line upstream of its pump.
After being extended, the RAT can be stowed:
The YELLOW hydraulic system operates the:
The RAT can be extended:
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-RAT2.jpg)
In case of HYD G (Y) (B) RSVR LO AIR PR, the affected hydraulic system:
Advertisement
Is it possible to check RAT's position and status?
The PTU is automatically tested:
The RAT is automatically deployed in case of:
With AC electric power available, the BLUE electric pump comes automatically ON:
On the ECAM HYD page, the "LO AIR PRESS" appears in amber along with a caution message if:
The purpose of the PTU is to:
The PTU FAULT light goes out when the crew selects the PTU OFF, except during an overheat (the light stays on as long as the overheat lasts).
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-Hydraulics.jpg)
When extended in flight, the RAT is coupled to a hydraulic pump and pressurizes the:
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-RAT2.jpg)
A drop-out RAT coupled to a hydraulic pump allows the blue system to function if electrical power is lost or both engines fail.
The YELLOW hydraulic system comprises:
A pump driven by engine 2 pressurizes the yellow system. An electric pump can also pressurize the yellow system, which allows yellow hydraulics to be used on the ground when the engines are stopped. Crew members can also use a hand pump to pressurize the yellow system in order to operate the cargo doors when no electrical power is available.
The YELLOW electric pump pushbutton is set to OFF. If a crewman sets the lever of the cargo door manual selector valve to OPEN or CLOSE position, the PTU and the Flight Controls will be:
It comes on automatically when someone sets the lever of the cargo door manual selector valve to OPEN or CLOSE. This inhibits the operation of other yellow system functions (except alternate braking and engine 2 reverse).
Advertisement
The BLUE hydraulic system operates the:
If electrical power fails when the Yellow system ELEC PUMP is operating, the pump remains off until the switch is cycled off and on after power has been restored.
![](https://www.smartcockpit.com/wp-content/uploads/2024/04/A320-Hydraulics-RAT-button.jpg)